Commercial HVAC analytics from the data you already generate
Your rooftop units produce readings every minute of every day. Elite Energy Management turns that stream into health scores, early warnings, cost visibility, and benchmarks, with no new hardware and answers in plain English instead of another wall of charts.
The analytics gap in commercial HVAC
Enterprise buildings get dedicated analytics platforms and energy engineers. Most commercial buildings, the restaurants, stores, offices, and theaters that run on rooftop units, get a thermostat schedule and a repair bill. The data to do better already exists. It just goes unanalyzed.
Data everywhere, insight nowhere
A 5 unit building generates thousands of readings a day through its thermostats. Almost all of it is discarded unread, along with the failure warnings buried inside it.
Enterprise tools do not fit ordinary buildings
Traditional building analytics deployments can cost tens of thousands per site. The economics only ever worked for campuses, which left most rooftop units unanalyzed.
Dashboards are not answers
Even where monitoring exists, it usually means more charts for someone to interpret. Operators do not need another dashboard. They need to know which unit, what is wrong, and how urgent.
Every building is analyzed in isolation
Without cross-site benchmarks, nobody knows whether a building's HVAC cost is normal or an outlier. Context is what turns a number into a decision.
What the platform analyzes
Elite Energy Management collects readings from every rooftop unit every 60 seconds through your existing EMS or smart thermostats, then applies AI models that learn each unit's healthy behavior, weather normalized, and evaluate every unit every night.
- Equipment behavior: cooling output, compressor staging, runtime patterns, cycling, and how each unit trends against its own baseline.
- Energy cost: what each unit costs to run per day, week, and month at your utility rate, and which units are working hard while producing little.
- Fleet context: anonymized peer benchmarking across regions and building types, plus long-term capacity degradation per unit for capital planning.
What Elite Energy Management does differently
Analytics only matter if someone can act on them. Everything the platform produces is delivered in operator language, ranked by urgency, with a recommended next step.
Health scores, not raw scores
Every unit gets a 0 to 100 health score, updated nightly, with a plain status: Running well, Monitoring, or Action needed. The math is sophisticated. The output is not.
Early failure detection
AI models flag behavioral drift days to weeks before failure. In technician-confirmed cases, warnings have arrived 1 to 9 days ahead of the problem surfacing.
An analyst you can ask questions
The AI assistant answers plain English questions about any site or unit, grounded in your live data, and produces exportable AI analysis reports for owners and executives.
Benchmarking and degradation tracking
See how your units compare to anonymized peers, and how much capacity each unit has lost over time, the two inputs that turn maintenance from reactive to strategic.
Flagged first, 89% of the time
Detection claims are easy to make, so we log every technician-confirmed service event across the fleet and track who saw the problem first. Across more than 60 confirmed events, the platform flagged the issue before anyone at the site did 89% of the time, with validated warnings arriving 1 to 9 days ahead of the failure surfacing. The confirmed cases span compressor failures, refrigerant leaks, coil fouling, electrical faults, and airflow problems, and we track the misses too, because an honest baseline is how detection keeps improving.
No new hardware. No installation visits.
We integrate with the equipment your locations already have, including eViewIoT, Pelican Wireless, Honeywell Resideo, ecobee, and Sensi. If you do not have an energy management system yet, we partner with eViewIoT to get you connected. Data starts flowing in hours, and the AI starts learning your equipment on day one.
- Software only. We connect through eViewIoT, Pelican Wireless, Honeywell Resideo, ecobee, Sensi, and more.
- Monitoring is read only. We never take control of your equipment or change your setpoints.
- Pricing starts at $5 per unit per month with a free 30 day pilot, so the analytics pay for themselves with a single avoided emergency.
Common questions about HVAC analytics
It is the practice of analyzing the data your HVAC equipment already produces, temperatures, runtime, compressor staging, to detect developing problems, quantify energy costs, and compare performance across units and sites. The goal is decisions, not charts.
No. The platform is software only and connects through your existing energy management system or smart thermostats. Data starts flowing within hours of connecting.
Multi-site commercial operators running rooftop units: restaurants, convenience stores, retail chains, offices, theaters, and similar buildings. If your equipment is on compatible controls, the platform works the same way regardless of industry.
EMS reports summarize schedules, setpoints, and alarms that already fired. Analytics evaluates behavior: whether each unit is acting like a healthy version of itself, what it costs to run, and where it is heading. One describes settings. The other predicts outcomes.
Yes. The platform produces AI-written site analysis reports suitable for owners, executives, and maintenance partners, and the dashboard supports your whole team at every location.
Your equipment has been reporting for years. Start reading.
Start a free 30 day pilot. No hardware, no commitment, and your first health scores within days of connecting.
Start free 30 day pilot