Retail HVAC monitoring that covers every store without growing your team
Comfort keeps shoppers in the store, and a stretched facilities team cannot watch every rooftop unit across the chain. Elite Energy Management monitors all of them automatically and tells you which stores need attention, days before customers would ever notice.
One facilities team, dozens of stores, zero visibility
Retail HVAC problems do not announce themselves. They build slowly on a roof nobody visits, in stores that all look fine on the schedule and setpoint dashboard, until one of them fails during your busiest weekend of the quarter.
Uncomfortable stores lose sales quietly
Shoppers do not complain about a warm store. They just leave sooner and buy less. By the time staff notice the temperature, the underlying equipment problem is weeks old.
Your facilities team is stretched thin
A handful of people cannot personally track hundreds of rooftop units. Without data, service dispatch is driven by whoever calls loudest, not by which equipment is closest to failing.
Emergency repairs cost 3 to 5x more
A planned service call runs $200 to $400. An emergency call runs $800 to $1,500 or more, and a failed compressor can cascade past $5,000. The equipment was showing signs for weeks. Nobody was watching.
Identical stores, mystery energy bills
Two stores with the same footprint and the same weather can have wildly different HVAC costs. Without unit-level data, nobody can say which store has the problem or what it is costing.
Why your thermostat and EMS dashboard miss it
Thermostats report whether the sales floor is at setpoint. An energy management system adds scheduling and remote control. Neither one watches how hard the equipment is working to get there. A rooftop unit running flat out on its second compressor stage to hold 72 degrees looks identical to a healthy unit on a basic dashboard.
- A degrading unit holds setpoint for weeks while burning far more energy than it should. No alarm fires, because setpoint was never missed.
- Second stage compressor overuse, short cycling, and falling cooling output are invisible on a schedule and setpoint dashboard.
- Store-to-store comparison is impossible without normalized unit-level data. Every store looks fine in isolation.
What Elite Energy Management does differently
We connect to the thermostats and energy management system your stores already have, collect readings from every rooftop unit every 60 seconds, and let AI learn how each unit behaves when it is healthy. When behavior drifts, you get a plain English warning with a recommended next step.
Every store ranked by health
Every rooftop unit gets a 0 to 100 health score, updated nightly, and every store is ranked so your team starts each week knowing exactly where to look. Running well, Monitoring, or Action needed. No interpretation required.
Early warning, not a breakdown
Our AI models compare each unit against its own history, weather normalized so hot days do not trigger false alarms. In real world cases the platform has flagged developing failures 1 to 9 days before they surfaced.
Peer benchmarking across your chain
See how each store's HVAC performance compares to similar stores in your portfolio and region. Outliers stand out immediately, and all peer comparisons are fully anonymized.
Know what each store costs to cool
Set your utility rate per location and see what every unit costs per day, week, and month. Find the stores quietly burning energy and put a dollar figure on the waste.
Caught five days early. Repair verified without a truck roll.
A kitchen unit at a restaurant chain location we monitor failed in late May. The platform had flagged it five days before anyone on site knew, with the health score down to 27 out of 100, so the operator scheduled a repair instead of waiting for an emergency. The part most monitoring tools cannot do came next: within days of the mid June service visit, the unit's score climbed back to 86, running well. The same nightly scoring that caught the failure independently confirmed the repair held. No follow-up visit, no wondering whether the invoice bought a real fix.
No new hardware. No installation visits.
We integrate with the equipment your locations already have, including eViewIoT, Pelican Wireless, Honeywell Resideo, ecobee, and Sensi. If you do not have an energy management system yet, we partner with eViewIoT to get you connected. Data starts flowing in hours, and the AI starts learning your equipment on day one.
- Connect through your existing EMS or smart thermostats. Nothing to install on the roof, no store visits.
- Monitoring is read only. We never take control of your equipment or change your setpoints.
- Pricing starts at $5 per unit per month, so a typical store costs less per month than one hour of a technician's time.
Common questions from retail operators
In most cases, yes. We connect through your existing energy management system or smart thermostats, including eViewIoT, Pelican Wireless, Honeywell Resideo, ecobee, and Sensi. If your stores have no EMS at all, we partner with eViewIoT to get you connected.
No. The platform normalizes data across systems, so stores on different EMS platforms appear side by side in the same dashboard with the same health scores and the same rankings.
It replaces roof-by-roof guesswork with a ranked list. Your team starts the week knowing which stores need attention, which units are the reason, and how urgent each one is, so planned maintenance replaces emergency response.
There are no site visits and no hardware to install, so onboarding is measured in hours, not weeks. Once we connect to your EMS, every store on that system comes online together.
No. It makes your existing provider more effective. Instead of dispatching on complaints, you dispatch on data: which store, which unit, what the problem looks like, and how urgent it is.
See every store's HVAC health on one screen
Start a free 30 day pilot. No hardware, no commitment, and your first health scores within days of connecting.
Start free 30 day pilot